This is an Android NFC-App for reading, writing, analyzing, etc. Mifare Classic RFID-Tags.GENERAL INFORMATIONThis tool provides several features to interact with (and only with) Mifare Classic RFID-Tags.
It is designed for users who have at least basic familiarity with the Mifare Classic technology.
┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓
Please read the whole page and make sure you got everything right before rating. Thank you!
If you rate with less then 4 stars, please leave a comment why. This way I can improve this app.
┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛FEATURES• Read Mifare Classic tags
• Save and edit the tag data you read
• Write to Mifare Classic tags (block-wise)
• Clone Mifare Classic tags
(Write dump of a tag to another tag; write 'dump-wise')
• Key management based on dictionary-attack
(Write the keys you know in a file (dictionary).
MCT will try to authenticate with these
keys against all sectors and read as much as possible.)
• Format a tag back to the factory/delivery state
• Write the manufacturer block of special Mifare Classic tags
• Create, edit and save key files (dictionaries)
• Decode & Encode Mifare Classic Value Blocks
• Decode & Encode Mifare Classic Access Conditions
• Display generic tag information
• Display the tag data as highlighted hex
• Display the tag data as 7-Bit US-ASCII
• Display the Mifare Classic Access Conditions as a table
• Display Mifare Classic Value Blocks as integer
• In-App (offline) help and information
• It's open source (GPLv3) ;)IMPORTANT NOTESSome important things are:
• The features this tool provides are very basic. There are no such
fancy things like saving a URL to an RFID-Tag with a nice looking
graphical user interface. If you want so save things on a tag,
you have to input the raw hexadecimal data.
• This App canNOT crack/hackany Mifare Classic keys. If you want to read/write an RFID-Tag, you
need keys for this specific tag first. For additional information
please read/seeGetting Startedfrom the links section.
• There will beno "brute-force" attackcapability in this application. It is way too slow due
to the protocol.
• This app willNOTwork on the following devices because
their hardware (NFC-controller) does not support Mifare Classic
(https://github.com/ikarus23/MifareClassicTool/issues/1).
This list may be incomplete.
- Google Nexus 4
- Google Nexus 5
- Google Nexus 7 (2013)
- Google Nexus 10
- Samsung Galaxy S4
- Samsung Galaxy Ace 3
- Samsung Galaxy Express 2
- Samsung Galaxy Mega
- Samsung Galaxy Note 3
- LG G2
- LG Optimus L7 II
- Motorola Moto XLINKS• Project Page on github:https://github.com/ikarus23/MifareClassicTool• MifareClassicTool on F-Droid:https://f-droid.org/repository/browse/?fdid=de.syss.MifareClassicTool• Getting started & other help:https://github.com/ikarus23/MifareClassicTool#getting-started• Bug tracker:IF YOU ENCOUNTER A PROBLEM PLEASE REPORT IT HEREhttps://github.com/ikarus23/MifareClassicTool/issues• Additional stuff:http://publications.icaria.de/mct/• Thread at the Proxmark3 Forum:http://www.proxmark.org/forum/viewtopic.php?id=1535For further information about Mifare Classic check:
•https://en.wikipedia.org/wiki/MIFARE(Wikipedia)
•https://www.google.com/search?q=mifare+classic(Google Search)
•http://www.nxp.com/documents/data_sheet/MF1S50YYX.pdf(Mifare Classic (1k) Datasheet)
MIFARE is a registered trademark of NXP Semiconductors.이 읽기, 쓰기, 분석 등 Mifare의 클래식 RFID-태그 안드로이드 NFC-응용 프로그램입니다.일반 정보
이 도구는 (만)와 Mifare의 클래식 RFID-태그와 상호 작용 할 수있는 몇 가지 기능을 제공합니다.
그것은 Mifare의 고전적인 기술을 적어도 기본적인 지식이있는 사용자를 위해 설계되었습니다.
┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓
전체 페이지를 읽고 당신이 바로 평가하기 전에 모든 것을 가지고 있는지 확인하십시오. 감사합니다!
당신은 더 적은 다음 4 등급으로 평가, 왜 의견을 남겨주세요. 이 방법으로 나는이 응용 프로그램을 향상시킬 수 있습니다.
┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛
의특징
• 읽기 Mifare의 클래식 태그
• 당신이 읽은 태그 데이터를 저장하고 편집
• Mifare의 클래식 태그에 쓰기 (블록 와이즈)
• 복제 Mifare의 클래식 태그
(다른 태그에 태그 쓰기 덤프, 쓰기 '덤프 방향')
• 키 관리 사전 공격에 근거
(파일 (사전)에 당신이 알고있는 키를 작성합니다.
MCT는 이들로 인증을 시도합니다
모든 분야에 대한 키와 가능한 한 많이 읽어 보시기 바랍니다.)
• 출고 / 배송 상태에 태그 형식
• 특수 Mifare의 클래식 태그의 제조 업체 블록 쓰기
• 생성, 편집 및 키 파일을 저장 (사전)
• 디코딩 및 인코딩 Mifare의 고전적인 가치 블록
• 디코딩 및 인코딩 Mifare의 클래식 액세스 조건
• 일반적인 태그의 정보를 표시합니다
• 강조 진수로 태그 데이터를 표시
• 7 비트 US-ASCII로 태그 데이터를 표시
• 테이블과 Mifare의 클래식 접속 상태를 표시합니다
• 정수로 Mifare의 고전적인 가치 블록을 표시
• 인 - 앱 (오프라인) 도움말 및 정보
• 그것은 오픈 소스 (GPL v3을)의 ;)
의중요 사항
몇 가지 중요한 사항은 다음과 같습니다 :
•이 도구가 제공하는 기능은 아주 기본입니다. 그런이 없습니다
좋은과 RFID-태그에 URL을 저장하는 등 멋진 일들이 찾고
그래픽 사용자 인터페이스를 제공합니다. 당신이 원하는 경우에 이렇게 태그에 물건을 저장,
당신은 입력에 원시 16 진 자료가 있습니다.
•이 응용 프로그램은 / 해킹 부수 지에서수
모든 Mifare의 클래식 키. 당신이 읽고 싶다면 / 당신은, RFID-태그를 쓰기
먼저 특정 태그에 대한 키가 필요합니다. 자세한 내용은
링크 섹션에서 을 시작하기에는/ 읽어 보시기 바랍니다.
• 더 "무차별"공격 가이되지 않습니다
이 응용 프로그램의 기능을 제공합니다. 그것은 너무 느린 때문입니다
프로토콜.
•이 응용 프로그램은 NOT에서것입니다 다음과 같은 장치에서 작동하기 때문에
자신의 하드웨어 (NFC 컨트롤러는) Mifare의 클래식보기를 지원하지 않습니다
(https://github.com/ikarus23/MifareClassicTool/issues/1).
이 목록은 완전하지 않을 수 있습니다.
- 구글 넥서스 4
- 구글 넥서스 5
- 구글 넥서스 7 (2013)
- 구글 넥서스 10
- 삼성 갤럭시 S4
- 삼성 갤럭시 에이스 3
- 삼성 갤럭시 익스프레스 2
- 삼성 갤럭시 메가
- 삼성 갤럭시 노트 3
- LG G2
- LG 옵티머스 L7 II
- 모토로라 모토 X다운로드 링크
• 대한 github 프로젝트 페이지 :https://github.com/ikarus23/MifareClassicTool• F-드로이드에 MifareClassicTool :https://f-droid.org/repository/browse/?fdid=de.syss.MifareClassicTool• 시작 및 기타 도움하기 :https://github.com/ikarus23/MifareClassicTool# - 시작
• 버그 추적 :
의만약 문제가 있다면 여기로 신고 해주세요https://github.com/ikarus23/MifareClassicTool/issues추가 재료를 • :http://publications.icaria.de/mct/• Proxmark3 포럼 주제 :http://www.proxmark.org/forum/viewtopic.php?id=1535Mifare의 고전적인 체크에 대한 자세한 내용은 :
•https://en.wikipedia.org/wiki/MIFARE(위키 백과)
•https://www.google.com/search?q=mifare+classic(구글 검색)
•http://www.nxp.com/documents/data_sheet/MF1S50YYX.pdf(Mifare의 클래식 (K) 데이터 시트)
MIFARE는 NXP 반도체의 등록 상표입니다.